YES1-100GA Automatic Transfer Switch ATS
YES1-100GA Automatic Transfer Switch ATS
YES1-250GA Automatic Transfer Switch ATS
YES1-630GA Automatic Transfer Switch ATS
YES1-1600GA Automatic Transfer Switch ATS

GA series 16A-3200A integral type three working positions ATSE with fire-fighting function automatic transfer switches with 2p/3p/4p

As we are factory, we can guarantee our price is first- hand.

We have professional consultants to give you the most suitable solution.

Delivery time: 1-10 days after received the payment.

We have our own R&D team.

Support OEM/ODM.

MOQ :only 1.

Get A Quote

Rated current: 16A~3200A

 

Pole: 4P

Model Type
YES1-100GA YES1-250GA YES1-630GA YES1-1600GA YES1-3200GA
Rated Current(Amp) 16A~100A 125A~250A 315A~630A 800A~1600A 2000A~3200A
Rated Insulation Voltage 690V 800V
Rated Impulse with Stand Voltage(KV) 8 KV
Rated Working Voltage AC400V
Usingzation Category AC - 33B AV - 33iB
Rated Short-Time with Stand Current 5KA/30ms 10KA/60ms 12.6KA/60ms 21KA/60ms
Transfer Time 2.5s 0.6s 1.2s~2.4s
Control Power Voltage DC24V、48V、110V           AC220V
Vote Number Double Throw
Wiring Manner Panel Mounting
Pole 4P
Weight(kg) 3.4 7.6 16.8 38.6 67
Automatic Transfer Switch (ATS) Manual Instruction YES1 series GA model

 

Notice:

Before you operate this Automatic transfer switch (hereinafter ATS),please read and understand these instructions carefully.

 

Dangerous

▲Before you install or operate the ATS,please read and understand these instructions carefully.Only the professional ATS personnel can carry out this installation,adjustment, repair and maintenance.

▲Many parts of the ATS, including printed circuit boards, when it work on-line voltage, cannot touch these parts. Use insulated tools only.

▲Do not touch the components which not protected.

▲Before maintenance the line of ATS, we should take the following preventive measures:

- Disconnect all power.

- Put a "prohibited closing" signs before the locate of the switch

- Switch to "0" position and then hang padlock.

 

 

Warning

 

Inconsistent with the line voltage:

Before Power and configuration for the ATS , we must ensure the line voltage is in the scope of the power supply voltage in the name plate of the ATS If the line voltage and power supply voltage range is different ,it will damage the ATS.Using it not according to the instructions it will damage the equipment.

 

 

Check and install

■ ATS delivery
   Check and make sure the product is the ordering products. 

 

■ Check the voltage 
   Check and make sure the voltage and the working voltage of the ATS. 
   Whether it is in the scope of the voltage.

 

■ Install the ATS
   Install the ATS according this manual instruction. 
   Install all the external accessories. 

 

■ Wiring the ATS
   Connect the bus bar of the switch which coincided with the rated current. 
   Connect the control wire and outside indication well according to the manual instruction.

 

 

Type and meaning

 

 

Main technology parameters

 

Frame class 100 250 1600 3200
Agreed heating current Ith(A) 63 100 160~3200
Rated current In(A) 16 20 25 32 40 50 63 80 100 125 160 250 400 630 800 1000 1250 1600 2000 2500 3200
Rated insulation voltage(Ui) 690V 800V
Rated concussion withstand voltage(Uimp) 8KV
Rated working voltage(Ue)  AC400V
Rated working current (le) 16 20 25 32 40 50 63 80 100 125 160 250 400 630 800 1000 1250 1600 2000 2500 3200
Using category  AC-33B AC-33iB
Rated short-circuit connection capacity 8KA 26KA 67KA
Rated short-time withstand current(Icw) 5kA/30ms 12.6kA/60ms 32kA/60ms
Transfer time Ⅰ-Ⅱ or Ⅰ-Ⅱ 2.5s 0.6s 1.2s 1.8s 2.4s
Control voltage DC24V, 48V, 110V, AC220V
Rated frequency Start 20W 325W 355W 400W 440W 600W
Norma 62W 74W 90W 98W 120W
Weight(kg) 4Pole 3.4 6 7.6 15.8 16.8 36 36 37 38.6 55 61 67

 

 

Switch structure explain

 

① Electric key lock:Control the inside controlling line power supply of the switch,when the Electric lock open,the switch could be operated automatically and remotely, when the electric lock closed,the switch could be operated by handle only.

 

② Operating handle: When operate the switch by the operating handle, the electric lock must be closed.

 

③ Mechanic padlock:When inspection,firstly turn the switch to the"0" position by operationhandle,then pull the padlock mechanism and close the padlock,then the inspection can be arranged:(Pull the mechanism padlock will cut off the inside controlling power supply of the switch.The switch couldn't be inelectric position and also couldn't be manual operation.

 

④ Position indication:It means the position of the switch working estate (Ⅰ,0,Ⅱ)

 

⑤ Controlling voltage: AC220V

 

 

Outline and installation dimensions

 

16A~1600A installation diagram ( 2 input 1 output )

 

 

 

16A~1600A installation dimensions( 2 input 1 output )

 

Specification Total dimension Switch installation Connection terminal
A A1 B B1 C E G H J K L M N P R S S1 T T1 U V ΦX Y Y1 Y2
16~100A 270 245 110 103 170 142 115 146 226 84 7 44 81 30 14 18 23 2.5 5 103 12 6 40.5 92 67.5
125~160A 348 305 147 142 224 190 144 185 284 102 7 49 91 36 20 25 37 3.5 / 127.5 19 9 56 127.5 127.5
250A 411 368 170 142 224 190 144 200 347 102 7 49 91 50 25 29 40 3.5 / 141.5 28 11 56 130 130
400A/3P 525 374 234 222 305 268 250 290 354 179 9 96 91 65 32 37 52 5 / 222 38 11 83 193 193
400A/4P 585 435 234 222 305 268 250 290 415 179 9 96 91 65 32 37 52 5 / 222 38 11 83 193 193
630A/3P 525 374 250 222 305 268 250 290 354 179 9 96 91 65 40 45 61 6 / 222 38 12 83.5 193.5 196
630A/4P 585 435 250 222 305 268 250 290 415 179 9 96 91 65 40 45 61 6 / 222 38 12 83.5 193.5 196
800~1000A/3P 785 520 328 250 390 326 360 / 496 220 11 115 84 120 60 64 88 8 / 250 56.5 13 109 254 254
800~1000A/4P 1080 635 328 250 390 326 540 / 610 220 11 115 84 120 60 64 88 8 / 250 60.5 13 109 254 254
1250A/3P 785 520 336 250 390 326 360 / 496 220 11 115 84 120 80 68 100 8 / 250 56.5 13 109 254 254
1250A/4P 1080 635 336 250 390 326 540 / 610 220 11 115 84 120 80 68 100 8 / 250 60.5 13 109 254 254
1600A/3P 785 520 336 250 390 326 360 / 496 220 11 115 84 120 80 68 108 10 / 250 56.5 13 110 255 255
1600A/4P 1080 635 336 250 390 326 540 / 610 220 11 115 84 120 80 68 108 10 / 250 60.5 13 110 255 255

 

 

16A~1600A installation diagram ( 2 input 2 output )

 

1000A~1600A installation diagram

 

16A~1600A installation dimensions ( 2 input 2 output )

 

Specification Total dimension Switch installation Connection terminal
A A1 B B1 C E G H J K L M N P R S T U V ΦX Y Y1
16~100A 270 245 106 103 170 142 115 146 226 84 7 44 81 30 14 18 2.5 103 12 6 40.5 92
125~160A 348 305 135 142 224 190 144 185 284 102 7 49 91 36 20 25 3.5 127.5 19 9 56 127.5
250A 411 368 159 142 224 190 144 200 347 102 7 49 91 50 25 29 3.5 141.5 28 11 56 130
400A/3P 525 374 234 222 305 268 250 290 354 179 9 96 91 65 32 37 5 222 38 11 83 193
400A/4P 585 434 234 222 305 268 250 290 414 179 9 96 91 65 32 37 5 222 38 11 83 193
630A/3P 525 374 250 222 305 268 250 290 354 179 9 96 91 65 40 45 6 222 38 12 83.5 193.5
630A/4P 585 434 250 222 305 268 250 290 414 179 9 96 91 65 40 45 6 222 38 12 83.5 193.5
800~1000A/3P 785 520 328 250 390 326 360 / 496 220 11 115 84 120 60 64 8 250 56.5 13 109 254
800~1000A/4P 1080 635 328 250 390 326 540 / 610 220 11 115 84 120 60 64 8 250 60.5 13 109 254
1250A/3P 785 520 336 250 390 326 360 / 496 220 11 115 84 120 80 68 8 250 56.5 13 109 254
1250A/4P 1080 635 336 250 390 326 540 / 610 220 11 115 84 120 80 68 8 250 60.5 13 109 254
1600A/3P 785 520 336 250 390 326 360 / 496 220 11 115 84 120 80 68 10 250 56.5 13 110 255
1600A/4P 1080 635 336 250 390 326 540 / 610 220 11 115 84 120 80 68 10 250 60.5 13 110 255

 

 

2000A~3200A installing dimensions

 

 

2000A~3200A installing dimensions

 

 Specification A A1 B G J R S T V Y1 Y2
2000A/3P 785 537 423 360 496 80 81 10 56 113 121
2000A/4P 1080 651 423 540 610 80 81 10 72 113 121
2500A/3P 785 537 433 360 496 80 81 15 56 118 116
2500A/4P 1080 651 433 540 610 80 81 15 72 118 116
3200A/3P 785 537 443 360 496 80 81 20 56 123 111
3200A/4P 1080 651 443 540 610 80 81 20 72 123 111

 

 

Manual instruction

 

1. GA1 type Economic ATS manual instruction(Fit for rated current:16A-100A)

Note: Please pay attention to Main power and Emergency power phase sequence corresponding relation when you are wiring the switch.

 

 

 

2. GA type fire type ATS manual instruction(Fit for rated current:16A-3200A)

Note: Please pay attention to Main power and Emergency power phase sequence corresponding relations when you are wiring the switch.

 

 

 

 

GA type ATS using manual (Fit for 16A-3200A fission type)

 

Note: Controller manual instruction please to see the Y-701/702 user manual

 

 

Method of terminal connection

 

 

 

Correct installation method of the switch

 

 

 

Wiring methods of the switch

 

1. The primary wiring diagram to see the picture 3.

2. The control power is derived from normal power, emergency power cand N phases.

3. Ⅰ andⅡ line control power AC220V connected with terminal 102~103,104~105 respectively, 102 and 104 are normal power and emergency power live line respective.

4. Terminal 101,106 are act as signal lamp to control the power supply. Note:101 and 106 couldn't be connected with any other lines.

5. When above (under) input line, under (above) terminalⅠand Ⅱ line A, B, C phases will be connected with copper lines or lines acting as output.

 

 

The instruction of debug the switch

 

1. Connect the normal power (Ⅰ),emergency power(Ⅱ) to the corresponding copper bar respectively;

 

① Automatic debugging

    Normal power supply with electric,emergency power supply with Electric,switchⅠline switch on
    Normal power supply without electric,emergency power supply with electric,switch Ⅱswitch on
    Normal power supply with electric,switchⅠ line switch on
    (Refer to the switch panel white indicating arrowhead)

 

② Remote debugging

    Press the bush button SB1,then the switchⅠline switch on
    Press bush button SB2,then the switch Ⅱ line switch on

 

③ Automatic/Remote(Manual)debugging

    When dial the function selection switch to the automatic position: the switch should act as the ① item required
    When dial the function selection switch to the remote (manual) position, the switch should act as the ② item required

 

2. When the switch is in the position of switch onⅠline or Ⅱ line,the signal lamp on the panel should indicate correspondingly;

 

3. After finished the debugging,close the power supply firstly,and transfer the switch to the "0" position by handle. (Middle position,refer to the switch panel white indicating arrowhead).

Related Products

News information

One Two Three brand frame circuit breaker passed the national CQC certification

Frame circuit breaker (ACB)Frame circuit breaker is also called universal circuit breaker. All its parts are installed in an insulated metal frame, wh...

Happy Mid-Autumn Festival

The Mid-Autumn Festival is the traditional festival of the Chinese nation, here we One Two Three Electric Co., Ltd. wish everyone a happy Mid-Autumn F...

Automatic Transfer Switch is Used for Cooperative Operation Between Generator Sets

Automatic Transfer Switch is Used for Cooperative Operation Between Generator Sets

The method of turning off the ATS of double power supply in the operation of the generator set is divided into manual operation mode and automatic ope...

Cast First Class Automatic Transfer Switch Quality

Cast First Class Automatic Transfer Switch Quality

One Two Three Electric Co,.Ltd as the largest and most professional automatic transfer switch manufacturer in China, the quality of switch determines...

GET A QUOTE

Get in Touch

Captcha Code
×