YEM1E-100 Mold case circuit breaker
YEM1E-100 Mold case circuit breaker
YEM1E-225 Mold case circuit breaker
YEM1E-400 Mold case circuit breaker
YEM1E-630 Mold case circuit breaker
YEM1E-800 Mold case circuit breaker

YEM1E Series 32A-800A moulded case electronic circuit breaker time delay function MCCB transient voltage overload protection 3P/4P

YEM1E series moulded case electronic circuit breaker(hereinafter referred to circuit breaker) is applied in the circuit of AC 50HZ/60HZ,its rated insulation voltage to 800V. It work in rate working voltage is 690 V or below, and the rate working current is 800A. It is used to transfer infrequent motor start.

Get A Quote

The circuit breaker has a long tome delay against overload. Short circuit short time time delay time limit,short circuit short time delay fixed time limit,short circuit instantaneous protection function,it also can protect the circuit and power supply equipment from damage.

Name Details
Product category Moulded Case Circuit
Design code 1
Product code Moulded Case Electronic Circuit Breaker
Current rank (AMP) 100A,225A,400A,630A,800A,1250A
Breaking capacity L,M,H
Pole 3P,4P
Part no. 300 no part(please see the release part no.table)
Rated current 32A~1250A
Use no. None=Power distribution type breaker 2=Protect motor
Operation type None=Handle direct operation,P=Electric operation,Z=Rotating handle operation
Writing None=Front board connection,R=Behind board connection,PR=Plug-in connection
Product Summary

 

YEM1E series moulded case electronic circuit breaker(hereinafter referred to circuit breaker) is applied in the circuit of AC 50HZ/60HZ,its rated insulation voltage to 800V. It work in rate working voltage is 690 V or below, and the rate working current is 800A. It is used to transfer infrequent motor start. The circuit breaker has a long tome delay against overload. Short circuit short time time delay time limit,short circuit short time delay fixed time limit,short circuit instantaneous protection function,it also can protect the circuit and power supply equipment from damage.

 

1.The circuit breaker protection features are complete and accurate,which can improve the reliability of power supply and avoid unnecessary power outages.

 

2.The circuit breaker has the advantages of small size,high breaking capacity,short arcing,anti-vibration.

 

3.The circuit breaker can be installed vertically or horizontally.

 

4.The circuit breaker has an isolation function.

 

5.The circuit breaker can’t be reserved into the line, that is only 1/3/5 are connected to the power line,and 2/4/6 are connected to the load line.

 

 

Product Feature
 

1.Environment temperature:-5℃~+40℃.

 

2.Altitude of the installation site does not exceed 2000m.

 

3.The relative humidity of the installation site should not exceed 50% at the highest temperature of +40℃,and can be higher at lower temperatures,such as relative humidity of 90% at 20 degrees Celsius. Special measures should be taken for occasional condensation due to temperature changes.

 

4.Pollution level is 3.

 

5.The circuit breaker passes the test of GB/T2423.10 and can withstand a frequency of 2HZ~13.2HZ, a displacement of ±1mm,a frequency of 13.2HZ~100HZ,and an acceleration of ±0.7g.

 

6.The main circuit installation category of the circuit breaker is Ⅲ,and the remaining auxiliary circuit and control circuit installation category is Ⅱ.

 

7.The circuit breaker is suitable for electromagnetic environment A.

 

8.Wet tropical type(TH type) circuit breaker meets the requirements of GB/T2423.4 test and can withstand the influence of humid air,smoke,oil mist and mold.

 

9.The circuit breaker shall be installed in a place where there is no risk of explosion and no conductive dust,no enough corrosion metal and damage to insulation.

 

10.Storage conditions:ambient air temperature is-40℃~+70℃.

Related Products

News information

One Two Three brand frame circuit breaker passed the national CQC certification

Frame circuit breaker (ACB)Frame circuit breaker is also called universal circuit breaker. All its parts are installed in an insulated metal frame, wh...

Happy Mid-Autumn Festival

The Mid-Autumn Festival is the traditional festival of the Chinese nation, here we One Two Three Electric Co., Ltd. wish everyone a happy Mid-Autumn F...

Automatic Transfer Switch is Used for Cooperative Operation Between Generator Sets

Automatic Transfer Switch is Used for Cooperative Operation Between Generator Sets

The method of turning off the ATS of double power supply in the operation of the generator set is divided into manual operation mode and automatic ope...

Cast First Class Automatic Transfer Switch Quality

Cast First Class Automatic Transfer Switch Quality

One Two Three Electric Co,.Ltd as the largest and most professional automatic transfer switch manufacturer in China, the quality of switch determines...

GET A QUOTE

Get in Touch

Captcha Code
×